PACE provider · Up to 24 CE credits(716) 274-8287Lab portal login
OsseoPure
Talk to LennyCall (716) 274-8287Send a text

Hands-on implant training · Buffalo, NY and Fort Lauderdale, FL

Still fixing full arch cases six months after you delivered them?

Loose screws. Broken multi-units. Chipped zirconia. Patients who come back clacking. You were taught to accept that as the cost of doing implants. It is not. It is the system you were handed.

Spend two or three days in the building where a different one was built. Watch it in live surgery. Run it with your own hands. Take it home Monday.

See the next courseWatch Dr. LaSorsa explain the system

Day one not for you? Full refund. No questions.

AGD PACE Program Provider

OsseoPure Continuing Education
Nationally Approved PACE Program Provider for FAGD/MAGD credit.
Approval does not imply acceptance by any regulatory authority or AGD endorsement.
04/01/2026 to 03/31/2027
Provider ID# 442869

Play video, 15:54: Dr. Matt LaSorsa walks through the system

Dr. Matt LaSorsa, 20,000+ implants, walks through the system. 16 min.

Sound familiar?

Every system you were trained on has the same weak points.

A 1.4 mm screw holding a full arch. A tie base between the implant and the bridge. Angled multi-units to rescue bad angles. Bone reduction to make room for all of it. Then a lab in another state that has never seen your patient.

You did the surgery right. The parts let you down.

"What I was looking for was something that was missing in the implant protocol I was doing before."Dr. James Walton, DDS, 50 years in practice

That is why the same calls keep coming:

  • Screw loosening
  • Multi-unit breakage
  • Stripped screws
  • Fractured zirconia
  • Lost cross-arch stabilization
  • Bone loss around the implants

A different way, not a better version of the old one

One system. From surgery to final restoration. Built by the people who got tired of fixing the old one.

OsseoPure started between a few dentists and a lab that was finishing 80 to 120 full arch cases a month and seeing every failure come back through the door. They stopped patching the old system and built one without the weak points.

No tie base. No angled multi-unit. A screw that centers itself. A framework the lab guarantees. A digital workflow where the surgeon, the lab and the restoration are on the same page from the first scan.

The old way

  • A 1.4 mm screw holding a full arch
  • A tie base between the implant and the bridge
  • Angled multi-units to rescue bad angles
  • Heavy bone reduction to make room for all of it
  • A lab in another state that has never seen your patient
  • Zirconia that chips, and a whole new bridge when it does

The OsseoPure way

  • A 1.6 mm screw that centers itself, so it doesn't loosen, strip or break
  • Screwed directly to the implant platform, no tie base
  • Any divergence seats passively, so the angle is your choice
  • Less reduction, because there's nothing to make room for
  • A lab in the same building as the training, with surgeons on staff
  • A framework the lab guarantees, with repairs you can do chairside

The courses exist so you can see it work before you change anything in your practice.

How the system worksSee the next course

Pick your course

Small groups. Live surgery. Instruments in your hands.

Bringing staff? $495 per seat, add them at registration or later. Small groups, so when a date is full, it is full.

Photo: Valdi in the lab

Why we built it

"I didn't set out to start an implant company."

"I ran a lab and clinics doing 80 to 120 full arch cases a month. Every system we used kept creating the same problems after delivery, and every one of those problems came back to us. The only way to handle that volume was a steady, predictable system with as few issues after completion as possible. So we built one. Then I kept meeting dentists all over the world fighting the same problems, and I decided to share it."

Valdi Blaszak, Founder and CEO
Read the full story

Monday morning

Not notes. A workflow.

Place it.

Surgical protocol, instrumentation, case selection and the failure points to avoid. You run the placement sequence at your own station.

Restore it in minutes, not appointments.

The Fast Fit workflow: crowns in about 10 minutes of chair time, fixed dentures 35, FP1 and FP2 bridges 60. You see it done and you do it.

Run the digital side.

Scan, design, print, deliver. Lab portal walkthrough with the people who will be making your cases.

Heal faster with PRF.

Blood draws, membranes, sticky bone, grafting. A full day on the 3-day course, with the most published PRF researcher in the world.

After the course

The course is day one. Then we come to you.

  1. 01

    Take the course.

    Lecture, live surgery, hands-on. Founders in the room.

  2. 02

    Open your lab portal.

    Your cases go to the same lab that was down the hall.

  3. 03

    We come to your office.

    Two days chairside on your first real cases, with Valdi and Frank. Travel on us.

    In Your Office

  4. 04

    Text us.

    "I've even texted them during surgery, and they get back to me." Dr. Rick Redmond, DMD

Faculty

The people who built it, not people who were hired to present it.

Meet the faculty
Headshot
Dr. Matt LaSorsa, DMDCo-Founder, 20,000+ implants placed
Headshot
Dr. Rick MironCo-Founder, 350+ published papers on PRF
Headshot
Dr. Thierry GiornoCo-Founder and engineer, designed the system
Headshot
Valdi BlaszakFounder and CEO, the lab
Headshot
Tom FitzpatrickCo-Founder, 40+ years in dental
Headshot
Lenny BiciPartner

What doctors say

"It's not just a lecture. We're being shown practical things. When you get to the hands-on part, that's where you really get an understanding and a feel for what we're doing."Dr. Brent Bradford, DDS, Syracuse, NY
"Over two days we did three or four surgeries and restored those patients the very same day. That was the missing piece. Since then, every patient I've treated has left with a screw-retained prosthesis."Dr. Rhett Eklund, DDS
"I flew all the way from California to check it out. It was a difficult case, but the result was phenomenal."Dr. Christine Oh, DDS, California

Hear it from doctors who came

The best measure of a course is what attendees say after it's over.

Short interviews recorded at our 2026 courses. Unscripted.

All videos on YouTube
Play video, 3:07: Highlight reel

What attendees said after the course

Play video, 2:32: Dr. Brent Bradford, DDS

"We're being shown practical things."

Play video, 4:47: Dr. Rhett Eklund, DDS

"Every patient has left with a screw-retained prosthesis."

Play video, 3:32: Dr. Christine Oh, DDS

"The result was phenomenal."

Want to see more? Every interview is on the OsseoPure YouTube channel.

Bringing your team? Staff seats are $495.

Your assistant, hygienist or office manager learns the restorative and digital side next to you, so Monday morning everyone is on the same page. Add them when you register or later from your confirmation email.

"They let me bring my two team members."Dr. Rhett Eklund, DDS

Zero risk

Come for day one. If it isn't for you, we refund your tuition.

Sit through the first day. If you don't think the course is worth it, tell us and we'll refund your full tuition. If you can't attend, your registration becomes a credit toward any future course. No penalties, no forms.

Not sure which course fits?

Call or text Lenny. He'll help you pick the right date, answer anything about the system, and tell you straight if a course isn't the right fit for where you are.

Call (716) 274-8287Send a text